首页 / 院系成果 / 成果详情页

Study on mechanical properties and mechanism of CO2 mineralized blast furnace slag based material  期刊论文  

  • 编号:
    65CC96768E1484FF7565A3EC93A28FDF
  • 作者:
    Sun, Wei#[1]Wen, Yao[1];Ding, Fanyu[1];Chen, Chong[2];Gao, Tong[1];Wen, Yiming[3];Zhang, Panke[1];Wang, Shaoyong[2];
  • 语种:
    英文
  • 期刊:
    CONSTRUCTION AND BUILDING MATERIALS ISSN:0950-0618 2026 年 513 卷 ; FEB 28
  • 收录:
  • 关键词:
  • 摘要:

    To address the critical issues of massive solid waste accumulation and excessive greenhouse gas emissions, Carbon Sequestration Technology based on the Multi-solid waste collaborative utilization offers a solution by enabling effective carbon capture, utilization, and storage (CCUS) while processing the waste materials. This study selects Blast Furnace Slag as the primary raw material, with cement and Ca(OH)(2) and other material as activators, to develop a novel composite cementitious material based on a synergistic activation-carbonation mechanism. Employing experimental techniques including uniaxial compressive strength (UCS) testing, thermal gravimetric analysis (TGA), X-ray (XRD), and scanning electron microscopy (SEM), an in-depth analysis was conducted to investigate its mechanical properties, microstructure, phase composition, and CO2 mineralization capacity.Research findings indicate that under curing periods of 3 and 7 days, the factors influencing the compressive strength of blast furnace slag based material solidified body rank in the following order: cement > Ca(OH)(2) > Na2SO4. Under different curing ages and carbonization time conditions, the optimal ratio of the solidified body is different.The dosage of admixture, curing age and carbonization time can effectively improve the UCS of solidified body, and the improvement of early UCS is the most significant, that is, when the cement content increases from 10 % to 15 %, The solidified body exhibited a strength increase of 84.8 %. When the content continues to increase to 20 %, it is only 12.8 %. With the fixed Ca(OH)(2) content at 3 %, increasing the cement content from 10 % (A-1) to 20 % (C-1) raised the 28-day CO2 absorption rate from 24.1 mg/g to 32.1 mg/g, representing a 33.2 % increase.Analysis of the solidification mechanism reveals that the synergistic effect between hydration and mineralization reactions significantly enhances the efficiency of CO2 utilization and sequestration. This study aims to provide a theoretical foundation and technical reference for employing blast furnace slag solid waste for CO2 mineralization and storage.

  • 推荐引用方式
    GB/T 7714:
    Sun Wei,Wen Yao,Ding Fanyu, et al. Study on mechanical properties and mechanism of CO2 mineralized blast furnace slag based material [J].CONSTRUCTION AND BUILDING MATERIALS,2026,513.
  • APA:
    Sun Wei,Wen Yao,Ding Fanyu,Chen Chong,&Wang Shaoyong.(2026).Study on mechanical properties and mechanism of CO2 mineralized blast furnace slag based material .CONSTRUCTION AND BUILDING MATERIALS,513.
  • MLA:
    Sun Wei, et al. "Study on mechanical properties and mechanism of CO2 mineralized blast furnace slag based material" .CONSTRUCTION AND BUILDING MATERIALS 513(2026).
  • 入库时间:
    3/20/2026 10:30:29 AM
  • 更新时间:
    3/20/2026 10:30:29 AM
浏览次数:17 下载次数:0
浏览次数:17
下载次数:0
打印次数:0
浏览器支持: Google Chrome   火狐   360浏览器极速模式(8.0+极速模式) 
返回顶部